Major Arduino Improvements

posted Aug 3, 2011, 6:40 PM by Astro Photo   [ updated Aug 29, 2011, 6:31 PM ]
Stored positions now use EEPROM
    -no need to re-enter after power cycle
Increased motor torque
    -uses a standby function so enable stays on until no movement for 1 second
Setup Menu (press #,#)
    -adjust backlight w/ rotary encoder
    -set maximum travel (stored in EEPROM)
    -set high speed rate
    -manual LCD display
Back to using 4x20 NetMedia LCD